v2.0.0.5
-Modification-
1. Add "mtcp_Device" in Modbus device. Now user should add the same name such as "mtcp_DeviceX" to define it first in TMflow, or we will have a problem of duplicated definition.
2. Clear the display message after resuming the program for weld start.

v2.0.0.4
-Add-
1. New check box to enable or disable the message "Pause before welding" when the project is running.
2. Display a message for two seconds when the points are modified.

-Modification-
1. End changes to Crater.
2. The layout of Recipe.
3. Modify the "Start Job and End job" to single "Job".
4. Display Recipe/function/WD in Path tab.
5. Modify "Other > Arc Setting > Arc End" "job" to "option1".


v2.0.0.3
-Add-
1. Add "var_Weld_Job variable" in TMflow which will be connected to Recipe。

-Modification-
1. When doing "Move to Point",  DataGrid could not update.
2. When doing "Move to Point", display bug in UI. 
3. Remove blending in Spline mode with Weaving.
4. Modify "acceleration time for circle with weaving" to 100ms and remove blending.
5. Add a display if there is a importing error for File Explorer.


v2.0.0.2
-Add-
1. File Explorer to load and upload file from TMflow/TextFiles.
2. Add unit selection.

-Modification-
1. Fix Modbus preset address error in #11~#20.


v2.0.0.1
-Add-
1. Base & Tcp display.
2. Job in Recipe.
3. New WaitTime for Left and Right side.
4. Add checking mechanism after Arc On/ Off.

-Modification-
1. UI layout in Path tab.
2. New numpad and the format for datagrid.
3. Modifiy the picture in Multilayer Help.
4. Only one Arc event now. Add a Pause before real welding.
5. Points after modification now will be recorded correctly now.
6. When using weaving, the "weld speed" means the overall travel speed along the path, not the speed on the hypotenuse.
7. Add Modbus items to 20.
8. Fix the problem when changing the Recipe in Path tab.

-Remove-
1. Points modification function。